The front mount is a single steel bar with five mounting bolts.  It's a common platform for attaching the front renovator, front rake, track renovator, and powder board.

It uses an electric actuator to raise and lower it and four white fiberglass rods for down force:

• The electric actuator rotates a steel bar that has two steel rods and four white fiberglass rods attached.

• The rods are facing forward to raise and lower the front mount in front of the Tidd Tech.

• The steel rods carry the weight of the front mount when it is up.

• The white fiberglass rods flex and apply down force when the implement that is attached to the front mount is on the snow.

• The loops on the end of the steel rods move up and down the orange indicator rod as down force is applied to the implement on the front mount.

There are four implements that attach to the front mount.

Front Mount Front Renovator Powder Board Front Rake Track Renovator		Front Mount	Front Mount
Front Implements

Back